CCNA 2 v5 Routing Protocols Chapter 3

CCNA 2 v5 Routing Protocols Chapter 3   1 Which two statements are true regarding classless routing protocols? (Choose two.) allows for use of both 192.168.1.0/30 and 192.168.1.16/28 subnets in the same topology* is supported by RIP version 1 sends subnet mask information in routing updates* sends complete routing table update to all neighbors reduces […]

CCNA 2 v5 Routing Protocols Chapter 2

CCNA 2 v5 Routing Protocols Chapter 2 1 The output of the show ip route command contains the following entry: S 10.2.0.0 [1/0] via 172.16.2.2. What value is indicated by the 1 in the [1/0] portion of the output? administrative distance* number of hops metric interface ID through which the network can be reached 2 Refer […]

CCNA 2 v5 Routing Protocols Chapter 1

CCNA 2 v5 Routing Protocols Chapter 1 1 What address changes as a packet travels across multiple Layer 3 Ethernet hops to its final destination? destination port destination IP source IP source Layer 2 address* 2 A network administrator issues the show ipv6 route command on R1. Which two types of routes are displayed in the […]

CCNA 2 v5 RSE Chapter 2 Practice Skill Assessment PT

  CONFIGURATION Switch(config)#hostname SW-1 SW-1(config)#banner motd #WARNING!!! Unauthorized Access Prohibited# SW-1(config)#line console 0 SW-1(config-line)#password cisco SW-1(config-line)#login SW-1(config-line)#exit SW-1(config)#enable secret class SW-1(config)#service password-encryption SW-1(config)#interface vlan1 SW-1(config-if)#ip address 10.10.10.100 255.255.255.0 SW-1(config-if)#no shutdown SW-1(config-if)#exit SW-1(config)#ip domain-name cisco.com SW-1(config)#crypto key generate rsa The name for the keys will be: SW-1.cisco.com Choose the size of the key modulus in the […]

CCNA 2 RSE Chapter 6 Practice Skills Assessment – Packet Tracer

CCNA Routing and Switching Routing and Switching Essentials RSE Chapter 6 SIC Practice Skills Assessment – Packet Tracer A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close or reload any exam windows during the exam. 2. Do not close Packet Tracer when you […]

CCNA 2 RSE Practice Skills Assessment – PT

CCNA 2 RSE Practice Skills Assessment – PT CCNA Routing and Switching Routing and Switching Essentials Practice Skills Assessment – Packet Tracer A few things to keep in mind while completing this activity: Do not use the browser Back button or close or reload any exam windows during the exam. Do not close Packet Tracer when […]

CCNA 2 R&S Essentials Practice Final v5.02 + v5.03 exam answers 2016

CCNA 2 R&S Essentials Practice Final v5.02 + v5.03 exam answers 2016   1 Which command would be best to use on an unused switch port if a company adheres to the best practices as recommended by Cisco? switchport port-security mac-address sticky ip dhcp snooping switchport port-security mac-address sticky mac-address switchport port-security violation shutdown shutdown* 2 […]

CCNA 2 Chapter 11 v5 Exam Answers 2016

CCNA 2 Chapter 11 v5 Exam Answers 2016 1 Which version of NAT allows many hosts inside a private network to simultaneously use a single inside global address for connecting to the Internet? dynamic NAT port forwarding PAT* static NAT 2 What is the group of public IPv4 addresses used on a NAT-enabled router known […]