32 New Questions in CCNA 200-120 Exam Answers


32 New Questions in CCNA 200-120 Exam Answers

Take Assessment

Question 1
Which three are the components of SNMP? (Choose three)

MIB *
SNMP Manager *
SysLog Server
SNMP Agent *
Set

Question 2
What are the Popular destinations for syslog messages to be saved?

Flash
The logging buffer .RAM *
The console terminal *
Other terminals
Syslog server *

Question 3
Syslog was configured with a level 3 trap. Which 3 types of logs would be generated (choose three)

Emergencies *
Alerts *
Critical *
Errors
Warnings

Question 4
What are the benefit of using Netflow? (Choose three.)

Network, Application & User Monitoring *
Network Planning
Security Analysis *
Accounting/Billing *

Question 5
Which protocol can cause overload on a CPU of a managed device?

Netflow
WCCP
IP SLA
SNMP *

Question 6
Which one of these is a valid HSRP Virtual Mac Address?

0000.0C07.AC01 *
0000.5E00.0110
0007.B400.1203
0000.C007.0201

Question 7
What are the three things that the Netflow uses to consider the traffic to be in a same flow?

IP address *
Interface name
Port numbers *
L3 protocol type *
MAC address

Question 8
What is the alert message generated by SNMP agents called ?

TRAP *
INFORM *
GET
SET

Question 9
Which three features are added in SNMPv3 over SNMPv2?

Message Integrity *
Compression
Authentication*
Encryption *
Error Detection

Question 10
In a GLBP network, who is responsible for the arp request?

AVF
AVG *
Active Router
Standby Router

Question 11
What levels will be trapped if the administrator executes the command

router(cfg)#logging trap 4

(Choose four.)

Emergency *
Notice
Alert *
Error *
Warning *

Question 12
What are the three things that netflow uses to consider the traffic to be in a same flow?

IP address *
Interface name
Port numbers *
L3 protocol type *

Question 13
Which is true about OSPF router-id? (Choose two .)

It is used for type 1 router LSA *
Highest IP address of the loopback is used *
router-id needs to be matched on ospf neighbors
router-id is 16 bit

Question 14
In GLBP, which router will respond to client ARP requests?

The active virtual gateway will reply with one of four possible virtual MAC addresses. *
All GLBP member routers will reply in round-robin fashion.
The active virtual gateway will reply with its own hardware MAC address.
The GLBP member routers will reply with one of four possible burned in hardware addresses.

Question 15
Which statement describes VRRP object tracking?

It monitors traffic flow and link utilization.
It ensures the best VRRP router is the virtual router master for the group. *
It causes traffic to dynamically move to higher bandwidth links
It thwarts man-in-the-middle attacks.

Question 16
What are three benefits of GLBP? (Choose three.)

GLBP supports up to eight virtual forwarders per GLBP group.
GLBP supports clear text and MD5 password authentication between GLBP group members. *
GLBP is an open source standardized protocol that can be used with multiple vendors.
GLBP supports up to 1024 virtual routers. *
GLBP can load share traffic across a maximum of four routers. *
GLBP elects two AVGs and two standby AVGs for redundancy.

Question 17
Which three statements about HSRP operation are true? (Choose three.)

The virtual IP address and virtual MA+K44C address are active on the HSRP Master router. *
The HSRP default timers are a 3 second hello interval and a 10 second dead interval.*
HSRP supports only clear-text authentication.
The HSRP virtual IP address must be on a different subnet than the routers’ interfaces on the same LAN.
The HSRP virtual IP address must be the same as one of the router’s interface addresses on the LAN.
HSRP supports up to 255 groups per interface, enabling an administrative form of load balancing. *

Question 18
Which three statements about Syslog utilization are true? (Choose three.)

Utilizing Syslog improves network performance.
The Syslog server automatically notifies the network administrator of network problems.
A Syslog server provides the storage space necessary to store log files without using router disk space. *
There are more Syslog messages available within Cisco IOS than there are comparable SNMP trap messages. *
Enabling Syslog on a router automatically enables NTP for accurate time stamping.
A Syslog server helps in aggregation of logs and alerts. *

Question 19
A network administrator enters the following command on a router: logging trap 3. What are three message types that will be sent to the Syslog server? (Choose three.)

informational
emergency *
warning
critical *
debug
error *

Question 20
What is the default Syslog facility level?

local4
local5
local6
local7 *

Question 21
What command instructs the device to timestamp Syslog debug messages in milliseconds?

service timestamps log datetime localtime
service timestamps debug datetime msec *
service timestamps debug datetime localtime
service timestamps log datetime msec

Question 22
Which three statements about the features of SNMPv2 and SNMPv3 are true? (Choose three.)

SNMPv3 enhanced SNMPv2 security features *
SNMPv3 added the Inform protocol message to SNMP.
SNMPv2 added the Inform protocol message to SNMP. *
SNMPv3 added the GetBulk protocol messages to SNMP.
SNMPv2 added the GetBulk protocol message to SNMP. *
SNMPv2 added the GetNext protocol message to SNMP.

Question 23
What are three reasons to collect Netflow data on a company network? (Choose three.)

To identify applications causing congestion. *
To authorize user network access.
To report and alert link up / down instances.
To diagnose slow network performance, bandwidth hogs, and bandwidth utilization. *
To detect suboptimal routing in the network.
To confirm the appropriate amount of bandwidth that has been allocated to each Class of Service. *

Question 24
What Netflow component can be applied to an interface to track IPv4 traffic?

flow monitor *
flow record
flow sampler
flow exporter

Question 25
What Cisco IOS feature can be enabled to pinpoint an application that is causing slow network performance?

SNMP
Netflow *
WCCP
IP SLA

Question 26
What command visualizes the general NetFlow data on the command line?

show ip flow export
show ip flow top-talkers
show ip cache flow *
show mls sampling
show mls netflow ip

Question 27
What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow? (Choose three.)

source IP address *
source MAC address
egress interface
ingress interface *
destination IP address *
IP next-hop

Question 28
What are three factors a network administrator must consider before implementing Netflow in the network? (Choose three.)

CPU utilization *
where Netflow data will be sent *
number of devices exporting Netflow data *
port availability
SNMP version
WAN encapsulation

Question 29
What are two enhancements that OSPFv3 supports over OSPFv2? (Choose two.)

It requires the use of ARP.
It can support multiple IPv6 subnets on a single link. *
It supports up to 2 instances of OSPFv3 over a common link.
It routes over links rather than over networks. *

Question 30
When a router undergoes the exchange protocol within OSPF, in what order does it pass through each state?

exstart state > loading state > exchange state > full state
exstart state > exchange state > loading state > full state *
exstart state > full state > loading state > exchange state
loading state > exchange state > full state > exstart state

Question 31
What are the Popular destinations for syslog messages to be saved?

Flash
The logging buffer RAM *
The console terminal *
Other terminals
Syslog server *

Question 32
What are the benefit of using Netflow? (Choose three.)

Network, Application & User Monitoring *
Network Planning
Security Analysis *
Accounting/Billing *

 

Take Assessment

Comments

  • Adrian
    Reply

    Why u do not post about the CCENT ICND1 100-101 v5.0 we need that!!

  • Mines
    Reply

    Excuse me, do you have all the questions or at least know where to get them?

Time limit is exhausted. Please reload the CAPTCHA.